• Hinged Lid with 2 Compression Latches
• Swinging triangular grab handles
• "Serial number" plate for part identification
• Lined with 2 Mesh x .063" Welded (.437" openings)
• 304 Stainless Steel 
• Electropolished

 13-1/2"Dia. x 22"H
 Approximate Outside Dimensions 

• 1/4" Dia. rod frame
• Hinged lid with four compression latches
• Hoist Handle
• Lined inside with 40 mesh x .010" woven wire (.015" openings)
• Lined outside with 4 mesh x .063" woven wire (.187"openings)
• 316 Stainless Steel
• Natural Finish

• Hinged Lid (with no latch)
• 3/8" dia. rod frame
• Dual grip Handles
• Two Mounting Tabs
• Lined with2 Mesh x .105" Lock Crimped Woven (.395" openings)
• 304 Stainless Steel, Natural finish

• Stacking Dual Grip Handles
• Stamped tag with company name, part number and capacity
• Lined bottom, Lid  and Sides with 3 Mesh x .063" Woven Wire (.270" Openings)
  304 Stainless Steel

 17-3/4"L x 9"W x 9"H
 Approximate Outside Dimensions 

• 1/4" Dia. rod frame
• Compression Lid
• Four Rod and Mesh Panels (Welded into Place) to create four compartments
• Two Drop Handles
• Removable Part Pedestals for smaller parts
• Lined bottom, lid, sides and pedestal with 3 mesh x .063" woven wire (.270" openings)
• 304 Stainless Steel
• Natural Finish

18-7/8"L x 11-1/32"W x 7-7/8"H
 Approximate Outside Dimensions 

 18" L x 12" W x 2" H 
 Approximate Outside Dimensions 

• 3/16" Rod Frame
• Lined with 4 Mesh x .028" Welded Wire (.222" Openings)
• Hinged Lid with Thumb Clasps
• No Handles
• 304 Stainless Steel
• Natural Finish

16-7/8"L x 11-1/32"W x 7-7/8"H (Carrier) 9"L x 8"W x 4-1/2"H (Insert)
 Approximate Outside Dimensions 

• Main Outer Basket Frame (No Mesh) and Lid (Large Mesh):
• 1/4" Dia. rod frame with straight vertical supports and conveyor bottom
• Two drop handles,Removable lid with V-spring actuated pins
• Lined lid only with 1 mesh x .105" lock-crimped woven wire (1.0" openings)
• 304 Stainless Steel construction throughout, Electropolished after fabrication
• Insert Basket with Tight-fitting Lid:
• 1/4" Dia. rod frame with straight vertical supports and conveyor bottom
• Drop-on lid with tight fitting frame (max lid to frame gap of .010"), 2 Compression Latches
• No handles,Lined bottom, lid and sides with 8 mesh x .047" woven wire (.078" openings)
• 304 Stainless Steel construction throughout

• Stainless Steel Lid with Spring Pins and Handles
  #JRI-2817
• Hinged End Panel with two Slam Latches
• 3 Mesh x .063 Woven Wire
  (.027" openings)
• 304 Stainless Steel

 15-1/4"L x 12"W x 5-13/16"H
 Approximate Outside Dimensions 

• 3/16" Dia. rod frame
• Hinged lid with two locking compression latches
• Three Drop handles
• Three Teflon "Slider" feet on bottom of basket secured between two 16 Ga. supports
• Interior to include one full height mesh divider panel positioned off center as shown
• Lined bottom, lid, divider panel, and sides with 2 mesh x .063" welded
• 304 Stainledd Steel
• Electro Polished after Fabrication
  

• 3/16” Thick laser-cut end plates (spoke pattern) with 3/4" Dia. connecting rod frame (frame outside of mesh)
• Flat full width swinging door with two compression latches
• Left side has one 3/4" dia. x 2-1/8” axle with 3/16" keyway 1” long
• Right side has solid 3/4”dia. x 1-1/4” axle
• Body, sides, and door lined with 4 mesh x .063" woven wire (.187" openings)
• 304 Stainless Steel construction throughout

6"Dia. x 10-3/4"H
Approximate Outside Dimensions 

• Stacking Frame on Bottom
• 16 Mesh x .028 Woven (.035" Openings) 
• Four Thumb Latches on Remvoeable Lid
• 304 Stainless Steel

• Removeable lid with four Thumb Latches to hold parts inside
• Lid sold as part #SDC-2015LD
• 5/16" dia. frame with straight vertical supports and parallel bottom crossbars
• Lined with 6 Mesh x .047 Woven (.119 Openings)
• 304 Stainless Steel, Natural finish

16-3/4"L x 11"W x 2-5/16"H 
 Approximate Outside Dimensions 

• 1/4" Dia. rod frame with straight vertical supports and three parallel bottom crossbars
• 11 Ga. laser cut top frame and lid
• 3/16" Dia. rod lid stops and Lay Flat handles
• Lined bottom, lid and sides with 30 mesh x .012 woven (.021 openings)
• 304 Stainless Steel construction throughout
• Natural finish

• Tank-Edge Hook
• Off-Set Single Handle
• 3 Mesh x .063 Woven
  (.270 Openings)
• Drop in Lid
• 304 Stainless Steel