Electronic Parts Baskets

Three M Tool understands the needs of the Electronics Industry: Many of the parts are very small, there must be no cross-contamination between cleaning batches, the chemicals used to remove flux and dross can be very aggressive, the parts often have fragile connectors.


Small Fine-Mesh Basket
Three M Tool Part #CT-0804

Small Fine-Mesh Basket
Three M Tool Part #CT-0804


Application: Stainless Steel Basket with Lid to securely hold tiny parts through an Ultrasonic Cleaning Process
Size: 8-1/16"L x 4-5/8"W x 2-5/16"H 
Approximate Outside Dimensions
Features:
  •  Hinged Lid with Compression Latch
  • Smooth interior with no gaps, holes, or catch points
  • 8 Mesh x .047" Woven (.078" openings) 
  • 16 Ga. frame
  • 304 Stainless Steel
  • Electropolished


REQUEST MORE INFORMATION ABOUT THIS PART


Small Fine-Mesh Basket
Three M Tool Part #CT-0804


Nylon Coated Stainless Steel Rack
Three M Tool Part #CT-150901

Nylon Coated Stainless Steel Rack
Three M Tool Part #CT-150901


Application: Nylon Coated Stainless Steel Basket with custom gridwork to hold small disk-shaped parts for  Cleaning Process.
Size:
15"L x 9-3/4"W x 1-5/16" H
Approximate Outside Dimensions
Features:
  • All surfaces Nylon Powder coated
  • Interior divided by two layers of 1/8" grid wires to create (168) 1-3/8" x 3/8" part compartments
  • Bottom lined with 4 Mesh x .063 Woven (.187 Openings)
  • Stacking Dual Grip Handles
  • 304 Stainless Steel


REQUEST MORE INFORMATION ABOUT THIS PART


Nylon Coated Stainless Steel Rack
Three M Tool Part #CT-150901


Cannister to hold Electronics Parts for Vapor Degreasing
Three M Tool Part #CT-SPC-547-034 & CT-SPC-547-035

Cannister to hold Electronics Parts for Vapor Degreasing
Three M Tool Part #CT-SPC-547-034 & CT-SPC-547-035


Application: Perforated Cannister Ultrasonic Vapor Degreasing and Cleaning Process
Size: 5"D x 9.95" H
Approximate Outside Dimensions
Features:
  • Tight fitting taper-lock lids to capture tiny parts
  • Ultra-smooth interior surfaces so parts can't be trapped and cross-contaminate loads. 
  • 26 ga. Perforated metal walls with .033" holes on .055" centers  
  • #CT-SPC-547-035 (5"D x 19.95"H)
  • 304 Stainless Steel
  • Electropolished


REQUEST MORE INFORMATION ABOUT THIS PART


Cannister to hold Electronics Parts for Vapor Degreasing
Three M Tool Part #CT-SPC-547-034 & CT-SPC-547-035