Heavy Duty Baskets

Heavy Duty Carbon Steel  Basket

11"L x 9"W x 2"H
Approximate Outside Dimensions

• 1/4" Dia. rod frame
• No handles
• Lined bottom and sides with 8 mesh x .047 woven wire (.078" openings)
• Carbon Steel construction throughout
• Natural finish

Heavy Duty Carbon Steel  Basket

11"L x 9"W x 2"H
Approximate Outside Dimensions

• 1/4" Dia. rod frame
• No handles
• Lined bottom and sides with 4 mesh x .063" woven wire (.187" openings) 
• Carbon Steel construction throughout
• Natural finish

Heavy Duty Stainless Steel  Basket

37-1/4" x 29-1/2" x 36"
Approximate Outside Dimensions

• 3/8" Dia. rod frame
• Twenty gusseted supports
• Conveyor bottom
• Four 3" lifting loops
• Lined bottom and sides with 2 mesh x .105" LK Crimp (.395" openings)
• 304 Stainless Steel construction throughout
• Natural finish 

Heavy Duty Stainless Steel  Basket

20" x 20" x 16"
Approximate Outside Dimensions

• 3/8" dia rod frame
• Hinged Lid with heavy duty draw latch
• Hoist Loops 
• 2 Mesh x .120 woven
• Carbon Steel
• Natural

Heavy Duty Stainless Steel Tumbler Basket

• 3/8" Dia. rod frame with gusseted vertical supports and ten radial bottom supports
• Top edge to include 11 Ga. inward sloping funnel and 3/16" x 1-1/4" x 1-1/4" rolled angle collar
• Bottom face to include 3/16" x 2" x 1-1/2" rolled angle riser
• Two 1-1/2" x 1/4" Bar pads with Machined Lifting Knobs
• Lined bottom and sides with 4 mesh x .063" woven wire (.187" openings)
• 304 SS
• Natural finish

Heavy Duty Stainless Steel Strainer Basket for Rail Car Loading

• 3/8" Dia. rod frame with five gusseted vertical supports
• Angled bottom corners
• Two pairs of 1/2" dia. rod grab handles/hatch opening catch bars
• Lined bottom and sides with 2 mesh x .080" woven wire (.420" openings)
• 304 Stainless Steel construction throughout
• Natural finish

Heavy Duty Stainless Steel Basket with Lifting 'V" Handle to be used for Hoisting

• 2" x 2" x 3/16" angle ring base frame with 2" x 3/16" top ring

•  vertical supports and bottom crossbars

• Interior sidewalls lined with 3/8" dia. rod rings to capture parts

• Horizontal center cross-tube for support and part division 

• 5/8" dia. rod Swinging V handle with gusseted corner bends, 

• Lined bottom with 1 mesh x .105" lock-crimped woven wire (1.0" openings)

• 304 Stainless Steel construction throughout

• Natural finish

Heavy Duty Carbon Steel Basket to be used for Heat Treating Process

• 1/2" Dia. rod frame with 18 gusseted vertical supports
• 1/2" x 1/2" square bar bottom support grid
• Four stacking lifting loops
• Lined bottom only with 14 Ga. steel perforated with 1/4" holes on 5/16" staggered centers
• Lined sides only with 3 mesh x .080" woven wire (.253" openings)
• Carbon Steel construction throughout, Natural finish

Heavy Duty Stainless Steel Flange Cap Basket to fit on end of Pipe used to Filter during the Dipping and Cleaning Process

• Two 11 Ga. Laser Cut Perimeter Flanges with Twenty 1-1/4" D thru holes on a 25" Bolt Circle
• Welded between Flanges is a 1-piece formed bowl of
  2 Mesh x .063" Woven Wire
  (.437" openings)
• 304 Stainless Steel

Heavy Duty Stainless Steel Basket for use in the Dipping and Cleaning Process

• One 22" side to include an 8" radius semi-circular notch
• Two 8" tall Swinging Round Loop Handles
• 4 Mesh x .063" Woven Wire (.187" openings)
• 304 Stainless Steel